|
Product Details:
|
| Appearance: | Emulsion | Molecular Weight:: | Medium |
|---|---|---|---|
| Type: | Flocculant | Dissolving Time: | 5-10(min) |
| PH Value: | 4-8 | Cas No.: | 9003-05-8 |
| Solid Content: | 30-50% | Application: | Water Treatment, Paper Making |
| High Light: | Metallurgical Nonionic Polyacrylamide,Paper Making Nonionic Polyacrylamide,Textile Nonionic Polyacrylamide |
||
Metallurgical Environment Fields Nonionic Polyacrylamide 9003-05-8
Nonionic emulsion polyacrylamide is a high-efficiency liquid flocculant of our company. It adopts the advanced technology of water-in-oil, uses W/0 emulsifier, re-oil polymerization reaction, and has high conversion ratewith high conversion rate, high molecular weight, high stability, multi-function,instant,etc.
Description
Polyacrylamide, also known as PAM, is an extremely water-soluble high polymer. It finds use in Paper Making, Chemical, Petroleum, Textile, Metallurgical and environment protection fields.
Specifications
| Appearance: | Off-White Granular Powder | |
| Ionic Charge: | Non-ionic | |
| Particle Size: | 20-100 mesh | |
| Molecular Weight: | Low to Medium | |
| Hydrolysis Degree: | Low | |
| Solid Content: | 89% Min | |
| Approximate Brookfield viscosity at 25° C: | @ 1.0% | >1500 |
| @ 0.50% | >600 | |
| @ 0.25% | >300 | |
| Bulk Density: | About 0.6-0.8 | |
| Specific Gravity at 25°C: | 1.01-1.1 | |
|
Recommended Working Concentration: |
0.1-0.5% | |
| PH (1% aqua solution): | 6-9 | |
| Storage Temperature (°C): | 0 - 35 | |
| Shelf Life: | 2 years | |
Application Methods:
| 1 |
Dissolving concentration: |
Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration. |
| 2 |
Dissolving time: |
The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant. |
| 3 |
Agitation speed: |
The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank. |
| 4 |
Application and Dosage: |
The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage. |
| 5 | Jar Test: | Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution. |
Package and Storage:
Contact Person: Evans Zhu
Tel: +86-13375585363
Fax: +86-532-80970818
