|
Product Details:
|
| Product: | Fracturing Fluid Additives | Appearance: | White Granule |
|---|---|---|---|
| Solid Content: | ≥89% | Insoluble: | ≤0.2% |
| Hydrolysis: | ≤25% | Application: | Oil Field |
| Molecular Weight: | ≥16(million) | Type: | Flocculant |
| High Light: | 100 Mesh Anionic Polyacrylamide Pam,Mining Anionic Polyacrylamide Pam,Cas 9003-05-8 |
||
Anionic Polyacrylamide High Molecular Weight Mining and Drilling Flocculant 100 mesh
Efficient cleaning of fracturing fluid is a new type of high viscosity synthetic polymer, with high viscosity, strong sand carrying capacity. This kind of fracturing fluid is very stable after preparation and can be used for various fracturing, conventional fracturing, and volumetric fracturing and so on. This product has good application prospect on conventional oil and gas reservoir and shale gas reservoir. And it is suitable for scaled application of oil fields. Its adjustable viscosity, strong sand carrying capacity, low friction and slippery make it high efficient on practice operation, which breakthrough the limitations of conventional slick water in foreign countries and help save much water and process cost.
Specifications:
| Ionic Charge: | Anionic | |
| Molecular Weight: | >16million | |
| Hydrolysis Degree: | 20-40% | |
| Solid Content: | >89% | |
| Bulk Density: | About 0.6-0.8 | |
|
Recommended Working Concentration: |
0.1% | |
| Shelf Life: | 2 years | |
Application Methods:
| 1 |
Dissolving concentration: |
Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration. |
| 2 |
Dissolving time: |
The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant. |
| 3 |
Agitation speed: |
The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank. |
| 4 |
Application and Dosage: |
The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage. |
| 5 | Jar Test: | Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution. |
Contact Person: Evans Zhu
Tel: +86-13375585363
Fax: +86-532-80970818
