|
Product Details:
|
| Appearance: | White Powder | Solid Content: | ≥88% |
|---|---|---|---|
| Molecular Weight: | 10-30(million) | Dissolving Time: | ≤60(min) |
| Model: | Anionic | Sample: | Test Free |
| Application: | Oil Drilling | Type: | Flocculant |
| High Light: | anionic polyacrylamide pam,polyacrylamide anionic |
||
Anionic Polyacrylamide PAM For Oil Drilling White Powder High Molecular Weight
Polyacrylamide, abbreviated as PAM is a linear polymer, which is one of the most widely used water-soluble polymers. Polyacrylamide And its derivatives can be used as effective flocculants, thickeners, paper enhancers and liquid drag reducers, etc., are widely used in water treatment, papermaking, petroleum, coal, mining and metallurgy, geology, textile, construction, etc. Industrial sector.
Anionic Polyacrylamide APAM index
| Molecular weight(million) | Appearance | Water solubility % | PH application range | Solid content % | Solution rate Min | Residual monomer content % |
| 10-12 | White particle powder | 10-15 | 5-14 | ≥89 | ≤60 | ≤0.05 |
| 14-16 | White particle powder | 25-30 | 5-14 | ≥89 | ≤60 | ≤0.05 |
| 15-18 | White particle powder | 25-30 | 5-14 | ≥89 | ≤60 | ≤0.05 |
| 17-20 | White particle powder | 25-30 | 5-14 | ≥89 | ≤60 | ≤0.05 |
| 20-30 | White particle powder | 22-30 | 5-14 | ≥89 | ≤60 | ≤0.05 |
1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.
2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 60℃).
3. The most economical dosage can be determined based on a preliminary test. The pH value of the water to be treated should be adjusted before the treatment.
Contact Person: Evans Zhu
Tel: +86-13375585363
Fax: +86-532-80970818
