|
Product Details:
|
| Model: | Polyacrylamide | Appearance: | White Powder |
|---|---|---|---|
| Solid Content: | ≥88% | PH Value: | 5-8 |
| USAGE: | Water Treatment Chemicals | Molecular Weight: | 12-16(million) |
| Cas No.: | 9003-05-8 | Charge Degree:: | 20-30% |
| High Light: | Municipal Anionic Polyacrylamide Flocculant,Pure Anionic Polyacrylamide Flocculant,Sludge Treatment Anionic Polyacrylamide |
||
Iran Stone Cutting Wastewater Anionic Polyacrylamide Blu Floc Polyacrylamide 100% Pure
The Raitte range of polymers and coagulants are widely used in the treatment of wastewater from both municipal and industrial wastewater treatment plants. Our polymers can be used in all solid-liquid separation processes like:
1. Primary sewage treatment.
Usually, Anionic polymer in combination with organic coagulants can reduce the biological loading of ihe secondary treatment. Additionally, adding polymers to accelerate settlement speed in the primary clarifiers which will reduce clarifiers’ volume and save more costs.
2. Activated sludge treatment.
Products choose are entirely depend on the application, normally a medium to high charge cationic polymer is required.
3. Digested sludge treatment.
A higher charged cationic polymer is more effective, and molecular weight should be based on the solid-liquid separation process.
Key Features and Benefits:
| 1 | High formation rate can increase dewatering capacity by 10-30 %. |
| 2 | It can make the cake moisture content lowers, reduce incineration fuel by 10-20 %. |
| 3 | Improved separability of cake from filter cloth can improve the filter life. |
| 4 | Displays marked effects also on putrefied sludge, enabling stable operation. |
| 5 | Breakage of floc decreases and the separation efficiency at the decanter is improved. |
Application and Dosage:
The dosage range of varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Jar Test:
Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of the top solution.
Contact Person: Evans Zhu
Tel: +86-13375585363
Fax: +86-532-80970818
